Zephyrnet Logo

The Process For Installing Solar Panels – Always Energy

Date:

Residential and commercial solar installations in NSW are steadily increasing as more and more homeowners and businesses are beginning to understand the importance of solar power energy.

Solar energy is relatively easy and scalable to produce. The energy generation process uses solar panels placed on roofs – a space otherwise underutilised.

Benefits of Installing Solar Panels

Solar panels offer a wide range of benefits, as listed below:

  • It reduces your energy bills
  • You will be reducing your carbon footprint and helping the environment

Now that you have understood the benefits of installing solar panels let us walk you through the installation process. A step-by-step guide is presented below to help you understand how to install solar panels.

Step-by-Step Guide for Installing Solar Panels

The entire process of installing solar panels takes around two days without interruptions. It is usually completed in seven steps which are explained below.

First Step – Receive a Proposal from your Solar Installer

The first step starts with receiving a pricing proposal from the desired solar installer. The proposal will include installation and solar panel costs. If you have considered other service providers, it may be tempting to go for the least expensive one. However, you risk increasing your repair costs as cheaper versions cut corners with below-par service and panels.

Second Step – Inspection and Planning from the Solar Installer

A solar installer will inspect to ensure your home is suitable for installing solar panels. He will observe any trees or tall buildings blocking the sunlight on the panels.

The installer will also inspect the roof’s pitch and direction to analyse the best position for panels to receive maximum light. Furthermore, they will examine the roof’s condition and check for any structural damages.

You will get the maximum return on investment only after proper inspection and planning from the solar installer.

Third Step – Build Scaffolding

Scaffolding is a temporary structure built to support the workers. It helps solar installers perform the installation process smoothly and safely.

Fourth Step – Secure Anchors

Securing roof anchors will ground the solar panels and attach them to the surface of the roofs. They should be set up securely as the solar panel rafters are attached. This process takes at most two hours, as measurements should be accurate.

Fifth Step – Install Solar Mounts and Panels

Your solar energy system will be highly optimised when the solar installer properly angles the solar mounts. The mounts attach to the panels and anchor them above the roof’s surface.

Once solar mounts are installed, the solar panels are fixed at an optimal angle to receive the maximum light. The fifth step is lengthy and can take up to four hours.

Sixth Step – Install Inverter

The solar inverter transforms DC energy into AC energy to produce usable solar energy. They are connected to the solar panels and consumer units using wires which power the house with solar energy. Their installation usually takes about one hour.

Seventh Step – Install Solar Batteries and Test

Solar batteries should be installed if you want to store solar Energy to keep your house powered throughout the day and night. After which, the solar installer will inspect and test the entire system, which takes around one hour. They will change the supply line or wirings if required.

Ready to Install Solar Panels in Port Macquarie & NSW?

Packed with a team of local solar designers and installers, Always Energy provides a complete solar energy solution. It is the preferred service provider across these locations in New South Wales:

Contact us now to install reliable and secure solar panels in New South Wales.

spot_img

Latest Intelligence

spot_img