Nano Technology

Quantum nanodiamonds may help detect disease earlier: The quantum sensing abilities of nanodiamonds can be used to improve the sensitivity of paper-based diagnostic tests, potentially allowing for earlier detection of diseases such as HIV, according to a study led by UCL research

Published

2 months ago

November 28, 2020

Home > Press > Quantum nanodiamonds may help detect disease earlier: The quantum sensing abilities of nanodiamonds can be used to improve the sensitivity of paper-based diagnostic tests, potentially allowing for earlier detection of diseases such as HIV, according to a study led by UCL research

An artist’s conception of nanodiamonds used for in vitro diagnostics. CREDIT
Ella Maru Studio/ UCL

Abstract:
The quantum sensing abilities of nanodiamonds can be used to improve the sensitivity of paper-based diagnostic tests, potentially allowing for earlier detection of diseases such as HIV, according to a study led by UCL researchers in the i-sense McKendry group.

Quantum nanodiamonds may help detect disease earlier: The quantum sensing abilities of nanodiamonds can be used to improve the sensitivity of paper-based diagnostic tests, potentially allowing for earlier detection of diseases such as HIV, according to a study led by UCL research

London, UK | Posted on November 27th, 2020

Paper-based lateral flow tests work the same way as a pregnancy test in that a strip of paper is soaked in a fluid sample and a change in colour – or fluorescent signal – indicates a positive result and the detection of virus proteins or DNA. They are widely used to detect viruses ranging from HIV to SARS-CoV-2 (lateral flow tests for Covid-19 are currently being piloted across England) and can provide a rapid diagnosis, as the results do not have to be processed in a lab.

The new research, published in Nature, found that low-cost nanodiamonds could be used to signal the presence of an HIV disease marker with a sensitivity many thousands of times greater than the gold nanoparticles widely used in these tests.

This greater sensitivity allows lower viral loads to be detected, meaning the test could pick up lower levels of disease or detect the disease at an earlier stage, which is crucial for reducing transmission risk of infected individuals and for effective treatment of diseases such as HIV.

The research team are working on adapting the new technology to test for COVID-19 and other diseases over the coming months. A key next step is to develop a hand-held device that can “read” the results, as the technique was demonstrated using a microscope in a laboratory. Further clinical evaluation studies are also planned.

Lead author Professor Rachel McKendry, Professor of Biomedical Nanotechnology at UCL and Director of i-sense EPSRC IRC, said: “Our proof-of-concept study shows how quantum technologies can be used to detect ultralow levels of virus in a patient sample, enabling much earlier diagnosis.

“We have focused on the detection of HIV, but our approach is very flexible and can be easily adapted to other diseases and biomarker types. We are working on adapting our approach to COVID-19. We believe that this transformative new technology will benefit patients and protect populations from infectious diseases.”

The researchers made use of the quantum properties of nanodiamonds manufactured with a precise imperfection. This defect in the highly regular structure of a diamond creates what is called a nitrogen-vacancy (NV) centre. NV centres have many potential applications, from fluorescent biomarking for use in ultra-sensitive imaging to information processing qubits in quantum computing.

The NV centres can signal the presence of an antigen or other target molecule by emitting a bright fluorescent light. In the past, fluorescent markers have been limited by background fluorescence, either from the sample or the test strip, making it harder to detect low concentrations of virus proteins or DNA that would indicate a positive test. However, the quantum properties of fluorescent nanodiamonds allow their emission to be selectively modulated, meaning the signal can be fixed at a set frequency using a microwave field and can be efficiently separated from the background fluorescence, addressing this limitation.

The optical results showed up to a five orders of magnitude (100,000 times) improvement in sensitivity compared to gold nanoparticles (that is, a much lower number of nanoparticles were required to generate a detectable signal). With the inclusion of a short 10-minute constant-temperature amplification step, in which copies of the RNA were multiplied, the researchers were able to detect HIV RNA at the level of a single molecule in a model sample.

The work was demonstrated in a laboratory setting but the team hopes to develop the tests so that the results could be read with a smartphone or portable fluorescence reader. This means that the test could, in future, be performed in low-resource settings, making it more accessible to users.

First author Dr Ben Miller (i-sense Postdoctoral Research Associate at the London Centre for Nanotechnology at UCL) said: “Paper-based lateral flow tests with gold nanoparticles do not require laboratory analysis, making them particularly useful in low resource settings and where access to healthcare is limited. They are low cost, portable, and user friendly.

“However, these tests currently lack the sensitivity to detect very low levels of biomarkers. By replacing commonly used gold nanoparticles with fluorescent nanodiamonds in this new design, and selectively modulating their (already bright) emission of light, we have been able to separate their signal from the unwanted background fluorescence of the test strip, dramatically improving sensitivity.”

Co-author Professor John Morton, Director of UCL’s Quantum Science and Technology Institute (UCLQ), said: “This interdisciplinary collaboration between UCLQ and the i-sense team in the LCN is a fantastic illustration of how foundational work on quantum systems, such as NV centre in diamond, can evolve from the lab and play a crucial role in real-world applications in sensing and diagnostics. Researchers at UCLQ are exploring and enabling the impact of these and other quantum technologies by working with industry and other academic research groups.”

###

The study was carried out by an interdisciplinary team of i-sense researchers from UCL, UCLH, and University of Oxford, led by the London Centre for Nanotechnology at UCL. i-sense is an Interdisciplinary Research Collaboration (IRC) funded by the UK Engineering and Physical Sciences Research Council (EPSRC).

This work was funded by the UK EPSRC, Royal Society, London Centre for Nanotechnology, H2020 European Research Council, the UCLH NHS Foundation Trust and supported by the National Institute for Health Research University College London Hospitals Biomedical Research Centre.

####

For more information, please click here

Contacts:
Mark Greaves

@uclnews

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:

Related Links

Nano Technology

Scientists synthetize new material for high-performance supercapacitors

Published

3 days ago

January 20, 2021

Republished by Plato

Home > Press > Scientists synthetize new material for high-performance supercapacitors

Photo: modified rGO supercapacitor electrodes

Abstract:
Scientists of Tomsk Polytechnic University jointly with colleagues from the University of Lille (Lille, France) synthetized a new material based on reduced graphene oxide (rGO) for supercapacitors, energy storage devices. The rGO modification method with the use of organic molecules, derivatives of hypervalent iodine, allowed obtaining a material that stores 1.7 times more electrical energy. The research findings are published in Electrochimica Acta academic journal (IF: 6,215; Q1).

Scientists synthetize new material for high-performance supercapacitors

Tomsk, Russia | Posted on January 19th, 2021

A supercapacitor is an electrochemical device for storage and release of electric charge. Unlike batteries, they store and release energy several times faster and do not contain lithium.

A supercapacitor is an element with two electrodes separated by an organic or inorganic electrolyte. The electrodes are coated with an electric charge accumulating material. The modern trend in science is to use various materials based on graphene, one of the thinnest and most durable materials known to man. The researchers of TPU and the University of Lille used reduced graphene oxide (rGO), a cheap and available material.

“Despite their potential, supercapacitors are not wide-spread yet. For further development of the technology, it is required to enhance the efficiency of supercapacitors. One of the key challenges here is to increase the energy capacity.

It can be achieved by expanding the surface area of an energy storage material, rGO in this particular case. We found a simple and quite fast method. We used exceptionally organic molecules under mild conditions and did not use expensive and toxic metals,” Pavel Postnikov, Associate Professor of TPU Research School of Chemistry and Applied Biomedical Science and the research supervisor says.

Reduced graphene oxide in a powder form is deposited on electrodes. As a result, the electrode becomes coated with hundreds of nanoscale layers of the substance. The layers tend to agglomerate, in other words, to sinter. To expand the surface area of a material, the interlayer spacing should be increased.

“For this purpose, we modified rGO with organic molecules, which resulted in the interlayer spacing increase. Insignificant differences in interlayer spacing allowed increasing energy capacity of the material by 1.7 times. That is, 1 g of the new material can store 1.7 times more energy in comparison with a pristine reduced graphene oxide,” Elizaveta Sviridova, Junior Research Fellow of TPU Research School of Chemistry and Applied Biomedical Sciences and one of the authors of the article explains.

The reaction proceeded through the formation of active arynes from iodonium salts. They kindle scientists` interest due to their property to form a single layer of new organic groups on material surfaces. The TPU researchers have been developing the chemistry of iodonium salts for many years.

“The modification reaction proceeds under mild conditions by simply mixing the solution of iodonium salt with reduced graphene oxide. If we compare it with other methods of reduced graphene oxide functionalization, we have achieved the highest indicators of material energy capacity increase,” Elizaveta Sviridova says.

###

The research work was conducted with the support of the Russian Science Foundation.

####

For more information, please click here

Contacts:
Alina Borovskaia
7-923-419-5528

@TPUnews_en

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:

Related Links

Nano Technology

Researchers guide a single ion through a Bose Einstein condensate

Published

4 days ago

January 20, 2021

Republished by Plato

Jan 20, 2021 (Nanowerk News) Transport processes are ubiquitous in nature but still raise many questions. The research team around Florian Meinert from the 5th Institute of Physics at the University of Stuttgart has now developed a new method that allows them to observe a single charged particle on its path through a dense cloud of ultracold atoms. The results were published in Physical Review Letters (“Transport of a single cold ion immersed in a Bose-Einstein condensate”) and are subject in a Viewpoint of the accompanying popular science journal Physics (“Tracking a Single Ion in an Ultracold Gas”).

Artistical visualization of the trajectory of a positively charged ion (yellow) through the BEC (green). (Image: Celina Brandes, University of Stuttgart) Meinert‘s team uses a so called Bose Einstein condensate (BEC) for their experiments. This exotic state of matter consists of a dense cloud of ultracold atoms. By means of sophisticated laser excitation, the researchers create a single Rydberg atom within the gas. In this giant atom the electron is a thousand times further away from the nucleus than in the ground state and thus only very weakly bound to the core. With a specially designed sequence of electric field pulses, the researchers snatch the electron away from the atom. The formerly neutral atom turns into a positively charged ion that remains nearly at rest despite the process of detaching the electron. In a next step, the researchers use precise electric fields to pull the ion in a controlled way through the dense cloud of atoms in the BEC. The ion picks up speed in the electric field, collides on its way with other atoms, slows down and is accelerated again by the electric field. The interplay between acceleration and deceleration by collisions leads to a constant motion of the ion through the BEC. “This new approach allows us to measure the mobility of a single ion in a Bose Einstein condensate for the very first time,” Thomas Dieterle, PhD student on the experiment, is pleased. The researchers’ next goal is to observe collisions between a single ion and atoms at even lower temperatures, where quantum mechanics instead of classical mechanics dictates the processes. “In future, our newly created model system – the transport of a single ion – will allow for a better understanding of more complex transport processes that are relevant in many-body systems, e.g. in certain solids or in superconductors,” Meinert is sure. These measurements are also an important step on the way to investigate exotic quasi-particles, so-called polarons, which can arise through interaction between atoms and ions. The neighboring lab at the institute already works on an ion microscope that will allow to directly observe collisions between atoms and ions. While an electron microscope uses negatively charged particles to create an image, this is what happens in an ion microscope with positively charged ions. Electrostatic lenses deflect ions similar to light rays in a classical optical microscope. The work was created in the Center for Integrated Quantum Science and Technology IQST, a consortium of the universities of Stuttgart and Ulm and the Max Planck Institute for Solid State Research in Stuttgart. The aim of the center is to promote synergies between physics and related natural and engineering sciences and to represent quantum science from the basics to technological applications. Researchers and practitioners from the fields of physics, chemistry, biology, mathematics, and engineering science at IQST investigate the world of quanta in its entirety and in some cases cooperate directly with the industry.

Source: https://www.nanowerk.com/nanotechnology-news2/newsid=57061.php

Nano Technology

Storing information with light: photo-ferroelectric materials

Published

4 days ago

January 20, 2021

Republished by Plato

Jan 20, 2021 (Nanowerk News) Can you imagine controlling the properties of a material by just shining light on it? We are used to see that the temperature of materials increases when exposed to the sun. But light may also have subtler effects. Indeed, light photons can create pairs of free charge carriers in otherwise insulating materials. This is the basic principle of the photovoltaic panels we use to harvest electrical energy from sun. In a new twist, a light-induced change of materials’ properties could be used in memory devices, allowing more efficient storage of information and faster access and computing. This, in fact, is one of our society’s current challenge: being able to develop high-performance commercially available electronic devices which are, at the same time, energy efficient. Smaller electronic devices having lower energy consumption and high performance and versatility. Now, researchers from the Institute of Materials Science of Barcelona (ICMAB, CSIC) have studied photoresponsive ferroelectric materials integrated in devices exploiting nanotechnologies and quantum effects. Memory elements have been engineered to store non-volatile information in distinct resistance states (ON/OFF). It has been discovered that, when properly designed, their electrical resistance can be modulated by pulsed light. This means that they can switch from a low-resistance to a high-resistance state just by the application of light pulses. “Materials that show changes of resistance under illumination are abundant, although the effect is typically volatile and the material recovers its initial state after some dwell time” says ICMAB researcher Ignasi Fina, co-author of the study (Nature Communications, “Non-volatile optical switch of resistance in photoferroelectric tunnel junctions”). “For devices to be used in computing and data storage, non-volatile optical control of electrical resistance is of potential interest” and adds “for non-volatile, we mean that the information can be retained stored in the device, even when the power is off”.

A photon reverses the binary 0/1 state of a memory device. (Image: ICMAB) Currently two different devices are required to use optical signals for non-volatile data storage: optoelectronic sensors and memory devices. The ICMAB study features these properties in one single material able to modulate its resistance by pulsed light: a photo-ferroelectric material. Ferroelectric materials have electrically switchable spontaneous non-volatile electric polarization. In ferroelectric ultrathin films of such material sandwiched between appropriate metals, a quantum mechanical phenomenon effect appears called the tunneling current. This effect allows a charge current flow across the ferroelectric layer, which is genuinely insulating, in an amount that depends on the direction of its polarization. In the explored devices, first an electric field is used once to write the ON/OFF states, and it is combined with the optical stimulus to promote the ON/OFF change of states, and reversibly modulate the resistance (from high to low, and vice versa). These devices are energy efficient for two main reasons: firstly, the energy consumption is reduced when the memory state is written, as it does not need any charge current flow. Secondly, as the information is stored in a non-volatile manner, the state is preserved and there is no need to refresh the information (re-writing) as continuously done in current RAMs memories of all computers, for example. The observed optical switch is not restricted to the studied materials and, thus, opens a path towards further investigations on this phenomenon. As for future applications, Ignasi Fina envisions the following: “The studied devices combine light sensor and memory functions. In addition, as shown in the study, the device behaves like a memristor. A memristor is a device that can display multiple resistance states according to the stimulus it has received, and is one of the basic devices for the development of neuromorphic computing systems. Therefore, the developed device opens a path to be explored in relation to its integration into neuromorphic vision systems, where the system learns to recognize images.”

Source: https://www.nanowerk.com/nanotechnology-news2/newsid=57060.php

Nano Technology

Do simulations represent the real world at the atomic scale?

Published

4 days ago

January 20, 2021

Republished by Plato

Jan 20, 2021 (Nanowerk News) Computer simulations hold tremendous promise to accelerate the molecular engineering of green energy technologies, such as new systems for electrical energy storage and solar energy usage, as well as carbon dioxide capture from the environment. However, the predictive power of these simulations depends on having a means to confirm that they do indeed describe the real world. Such confirmation is no simple task. Many assumptions enter the setup of these simulations. As a result, the simulations must be carefully checked by using an appropriate “validation protocol” involving experimental measurements. To address this challenge, a team of scientists at the U.S. Department of Energy’s (DOE) Argonne National Laboratory, the University of Chicago and the University of California, Davis, developed a groundbreaking validation protocol for simulations of the atomic structure of the interface between a solid (a metal oxide) and liquid water (Physical Review Materials, “Validating first-principles molecular dynamics calculations of oxide/water interfaces with x-ray reflectivity data”). The team was led by Giulia Galli, a theorist with a joint appointment at Argonne and the University of Chicago, and Paul Fenter, an Argonne experimentalist. Computer simulation at the atomic scale

Pictorial representation of joint experimental and computational study of materials. The study utilized the Advanced Photon Source (upper panel) and Argonne Leadership Computing Facility (lower panel). The team addressed the atomistic structure of interfaces, which are ubiquitous in materials. (Image: Emmanuel Gygi, University of California, San Diego) “We focused on a solid/liquid interface because interfaces are ubiquitous in materials, and those between oxides and water are key in many energy applications,” said Galli. “To date, most validation protocols have been designed for bulk materials, ignoring interfaces,” added Fenter. “We felt that the atomic-scale structure of surfaces and interfaces in realistic environments would present a particularly sensitive, and therefore challenging, validation approach.” The validation procedure they designed uses high-resolution X-ray reflectivity (XR) measurements as the experimental pillar of the protocol. The team compared XR measurements for an aluminum oxide/water interface, conducted at beamline 33-ID-D at Argonne’s Advanced Photon Source (APS), with results obtained by running high-performance computer simulations at the Argonne Leadership Computing Facility (ALCF). Both the APS and ALCF are DOE Office of Science User Facilities. “These measurements detect the reflection of very high energy X-ray beams from an oxide/water interface,” said Zhan Zhang, a physicist in Argonne’s X-ray Science division. At the beam energies generated at the APS, the X-ray wavelengths are similar to interatomic distances. This allows the researchers to directly probe the molecular-scale structure of the interface. “This makes XR an ideal probe to obtain experimental results directly comparable to simulations,” added Katherine Harmon, a graduate student at Northwestern University, an Argonne visiting student and the first author of the paper. The team ran the simulations at the ALCF using the Qbox code, which is designed to study finite temperature properties of materials and molecules using simulations based on quantum mechanics. “We were able to test several approximations of the theory,” said Francois Gygi from the University of California, Davis, part of the team and lead developer of the Qbox code. The team compared measured XR intensities with those calculated from several simulated structures. They also investigated how X-rays scattered from the electrons in different parts of the sample would interfere to produce the experimentally observed signal. The endeavor of the team turned out to be more challenging than anticipated. “Admittedly, it was a bit of a trial and error at the beginning when we were trying to understand the right geometry to adopt and the right theory that would give us accurate results,” said Maria Chan, a co-author of the study and scientist at Argonne’s Center for Nanoscale Materials, a DOE Office of Science User Facility. “However, our back and forth between theory and experiment paid off, and we were able to set up a robust validation protocol that can now be deployed for other interfaces as well.” “The validation protocol helped quantify the strengths and weaknesses of the simulations, providing a pathway toward building more accurate models of solid/liquid interfaces in the future,” said Kendra Letchworth-Weaver. An assistant professor at James Madison University, she developed software to predict XR signals from simulations during a postdoctoral fellowship at Argonne. The simulations also shed new insight on the XR measurements themselves. In particular, they showed that the data are sensitive not only to the atomic positions, but also to the electron distribution surrounding each atom in subtle and complex ways. These insights will prove beneficial to future experiments on oxide/liquid interfaces.

Source: https://www.nanowerk.com/nanotechnology-news2/newsid=57058.php