Connect with us

Aviation

WestJet pilots protest ‘outsourced’ flights to Swoop in Calgary

Avatar

Published

on

From Global News – link to story

By Kaylen Small Global News | October 25, 2020

WestJet pilots protested in Calgary on Sunday, Oct. 25, 2020.
WestJet pilots protested in Calgary on Sunday, Oct. 25, 2020. Global News

About 50 WestJet pilots protested outside the Calgary International Airport on Sunday to draw attention to what they call the “outsourcing” of WestJet flights to low-cost carrier Swoop.

Though both are owned by the same company — the WestJet Group — protesters said Swoop is flying WestJet’s routes, which means fewer hours for WestJet pilots.

“The biggest issue for us is routes that have been flown by WestJet Airlines over the last two decades are now being flown by Swoop,” said Capt. Dave Colquhoun, WestJet Master Executive Council chair.

“When Swoop was initially envisioned, we were told that wouldn’t happen. Now that it started to happen, especially out of Toronto, we’re concerned about that and we want to bring that concern to the public view.”

Colquhoun said pilots want to see the WestJet Group consult all members on how to grow Swoop.

“They’ve done it unilaterally and they’ve done it in an environment where just recently we gave in major concessions to help them weather the storm,” he said.

“Our pilots have taken substantial cuts in wages and working conditions in order to help our airline through this pandemic. Right now, our guys are flying about a half to a third of what they were a year ago.”

The WestJet Group responded to the union’s concerns, telling Global News that Swoop is important to the company’s future.“[Swoop] is well-positioned to serve price-sensitive travellers while stimulating demand in Canada’s largest market,” it said.

“After a drop in guest traffic of up to 95 per cent and with recovery slower than anticipated, stimulating demand in our industry is critical for our group’s survival. Toronto is our country’s largest air travel market, and every guest who flies with WestJet, Encore or Swoop is a win for our group, assisting in our recovery and supporting our collective future.”

The WestJet Group said its focus is “ensuring we have a long-term sustainable future” while “providing good jobs for thousands.”

There is no anticipated impact on WestJet operations.

© 2020 Global News, a division of Corus Entertainment Inc.

Source: https://canadianaviationnews.wordpress.com/2020/10/25/westjet-pilots-protest-outsourced-flights-to-swoop-in-calgary/

Aerospace

Valuechain’s MES solution now integrates PrintSyst’s AI Engine

Avatar

Published

on

Valuechain’s MES solution now integrates PrintSyst’s AI Engine

Today marks an important milestone in the strategic partnership between Valuechain Enterprise Systems and PrintSyst, upon completing the integration of PrintSyst’s cutting edge AI engine, the 3DP AI-Perfecter, into Valuechain’s industrial-grade MES, DNA.am.

The two companies have partnered to develop an integrated MES that will leverage PrintSyst’s world class AI engine, which enables an automated pre-printing workflow and thus assists customers in industries such as Aerospace, Automotive and Defence, to significantly improve their productivity and scale up their 3D printing production.

The integrated Valuechain-PrintSyst solution provides a state-of-the-art smart automation that learns from previous Additive Manufacturing builds and analyses the exact intent for which a specific part is going to be used to comply with industry specifications. It then accordingly suggests printing parameters that will have the highest probability of right-first-time Additive Manufacturing builds, accurately estimates 3D parts costs, recommends on the most suitable materials to be used based on 3D parts’ functional needs and eliminates the need for trial and error. Bottom line, this paves the way for transforming 3D Printing productivity through improved quality, cost and delivery responsiveness.

Tom Dawes, CEO of Valuechain, (pictured above on the right) commented: “Industrial 3D printing has continued to grow over recent months, as companies that initially trialled the technology are looking to scale up. Covid-19 has illustrated the importance of a robust supply chain structure, underpinned by secure collaboration and intelligence. However, many of these companies lack the digital solutions that drive 3D printing productivity while providing a path for an automated, standardized and certifiable digital workflow. Based on our customers’ feedback so far, I am confident that our collaboration with PrintSyst will be pivotal in addressing this critical need.”

Itamar Yona, PrintSyst’s CEO and co-founder, added that “combining our world class AI engine and hands on industry experience, with DNA.am’s leading industrial-grade MES, will step change the manual, costly and unscalable 3D printing workflow. We are now able to take into account multiple additional parameters that exist in DNA.am MES and automatically train our engine so we can provide instant, highly personalised and optimized printing recommendations to our joint customers.”

www.DNA.am

Tags

Share This Article

Subscribe to our FREE Newsletter

Related Articles

Most recent Articles

Source: https://www.aero-mag.com/valuechains-mes-solution-now-integrates-printsysts-ai-engine/

Continue Reading

Aerospace

Paragraf drives electric transport revolution with graphene sensors

Avatar

Published

on

Paragraf drives electric transport revolution with graphene sensors

Paragraf, a leader in graphene-based transformative electronic sensors and devices, is helping to realise an industry first by implementing a supply chain for graphene Hall-Effect sensors used in high-temperature Power Electronics, Electric Machines and Drives (PEMD) within the aerospace sector.

Named High-T Hall, the project stems from the UK Research and Innovation’s (UKRI) ‘Driving the Electric Revolution’ challenge and brings together Paragraf, Rolls-Royce, TT Electronics (Aero Stanrew) and the Compound Semiconductor Applications Catapult (CSA Catapult). It is set to demonstrate how graphene-based Hall Effect sensors can operate reliably at high temperatures, paving the way for more efficient electric engines in aerospace and beyond.

Hall Effect sensors play a major role in monitoring current levels and magnetic fields in PEMD applications, which is critical to monitoring drive power consumption and machine speed and position. The deployment of conventional silicon Hall sensors is, however, restricted to environments with temperatures below 150°C and frequencies below 100kHz, which can constrain system level design. Project High-T Hall aims to demonstrate that graphene-based Hall Effect sensors will operate reliably up to 180°C, and potentially even at temperatures of up to 230°C allowing them to be mounted within the machine or power module enclosure thus  enabling much greater flexibility in the design of new PEMD equipment aligned to Silicon Carbide power devices and higher performance more compact electrical machines. The ability to monitor current levels more accurately and reliably will enable better overall system control, which will in turn reduce size and weight and help design more efficient electric engine systems.

Ivor Guiney, co-founder of Paragraf, commented: “We are extremely proud to be part of this pioneering project that will hopefully lead to better efficiency in all-electric engines and help accelerate the adoption of e-planes and, more generally, electric vehicles. Our graphene Hall Effect sensors have already proven to possess unique cryogenic properties, so their resistance to high temperatures will help demonstrate how uniquely versatile graphene devices are from a thermal standpoint.”

As the lead partner in High-T Hall, Paragraf will design and manufacture custom Hall Effect sensors for integration into the systems of Rolls-Royce and TT Electronics. The CSA Catapult will provide their packaging expertise to develop innovative packaging solutions and advanced assembly process for realising the prototypes. The role of Rolls-Royce and TT Electronics will be to test the Paragraf’s graphene Hall Effect sensors in state-of-the-art, aerospace PEMD applications, with the former pioneering the use of this technology in their upcoming gas turbine product portfolio. TT Electronics will use it to develop a range of modular current sensors for use in rugged aerospace electrical systems to reduce Hall Effect sensor temperature-related errors.

Head of Electronics, Stephen Dennison at Rolls-Royce stated: “Rolls-Royce is committed to playing a leading role in reaching net zero carbon by 2050 and this includes championing sustainable power. This project with Paragraf and the other partners will help develop a resilient supply chain that enables companies to source made-to-measure, innovative electronic components to enhance the efficiency and performance of power, electronics, machines and drives.”

Owen Rolfe, Business Development Director at TT Electronics stated: “Now more than ever it’s important we make a proactive effort to accelerate innovation within the Aerospace supply chain. In this case, higher temperature operation of these sensing solutions has the capability to deliver significant efficiency benefits to power electronics systems and that’s something we’re extremely proud and well placed to support.”

Martin McHugh, CTO and Acting CEO at the CSA Catapult stated: “The aim of project High-T Hall is to demonstrate an integrated UK supply chain solution for advanced Hall sensing within PEMD. This will address the issues PEMDs experience when switching frequencies across a broad range of temperature conditions. We are very pleased to be involved in the sensor test platform and reliability testing on this project.”

The use of a graphene-based Hall Effect sensors in high-temperature aerospace environments could not only be replicated in other industries such as automotive. It may also open new opportunities for other graphene-based electronics, beyond sensors, which can help improve efficiency and performance even further in applications such as the engines of EVs.

Project High-T Hall started in July 2020 and is now due to run for one year. It is funded by UK Research and Innovation.

www.paragraf.com

Tags

Share This Article

Subscribe to our FREE Newsletter

Further Articles

Most recent Articles

Source: https://www.aero-mag.com/paragraf-drives-electric-transport-revolution-with-graphene-sensors/

Continue Reading

Aviation

Major US Airlines Pause Nonstop Flights To Shanghai

Avatar

Published

on

Advertisement:

American Airlines and United are putting their nonstop Shanghai plans on hold, the carriers confirmed Tuesday. Reports on long waits to enter the country and restricted accommodations have given rise to concerns regarding crew rest requirements. Services, including cargo-only, will continue to operate via Seoul Incheon. Meanwhile, Delta Air Lines is reportedly going ahead with nonstop flights to China.

American and United Airlines are pausing their plans for nonstop Shanghai flights due to concerns over crew rest requirements and accommodations. Photo: Getty Images

Both American Airlines and United have halted their plans to fly nonstop to Shanghai in China. Concerns have been raised from unions about reports on lengthy waits for tests upon arrival.

There is also apprehension regarding the government-mandated hotel for crew at Pudong airport, where movement is reported to be severely restricted. These cumbersome procedures take a large chunk out of the federally regulated rest requirements for airline crew.

Crew continues to change in Seoul

American had planned to initiate non-stop cargo-only flights from Los Angeles to Shanghai in December. However, it will now continue to operate the service with a stop in Seoul, South Korea, for a crew change, CNBC reported Tuesday.

Meanwhile, the return journey will go straight from Shanghai to LA. Sources told the publication that American would continue to include stops in Seoul for its flights from Dallas-Fort Worth to Shanghai and from LAX to Beijing.

“We started operating passenger service from DFW (Dallas/Fort Worth) to PVG (Shanghai Pudong) on Nov. 11 through Seoul (ICN) due to testing requirements for crews,” a spokesperson for American Airlines told Reuters. They also added that cargo flights are continuing to operate through Seoul for the same reason.

Advertisement:

United previously eliminated its Seoul stopover on its way to Shanghai but has now added it back to the itinerary. Photo: Vincenzo Pace | JFKJets.com

United adding the stop back in

United Airlines previously flew to Shanghai via Seoul on the way there. However, on October 21st, the airline removed the stop on its San Fransisco to Shanghai Pudong route. Now, due to the same concerns over crew rest time and limited local accommodations, the carrier is adding Seoul back to the itinerary.

“Due to changes in operating conditions, we adjusted service between San Francisco and Shanghai to now include a stop in Seoul, South Korea for a crew change as we did earlier this year,” a United spokesperson said to CNBC.

Advertisement:

Delta, meanwhile, the first US carrier to resume air traffic ties with China, is reportedly going ahead with nonstop services from Seattle and Detroit. Photo: Getty Images

Union making sure Delta’s decision is airtight

Delta Air Lines, however, is, thus far, still going ahead with the reintroduction of direct flights to China’s largest city. The carrier is set to offer nonstop services from both Seattle and Detroit starting this week. As the first US airline to reconnect the US and China since the flight suspension in February, Delta resumed a twice-weekly service to Shanghai in June. Since then, flights have also operated with a stop at Seoul Incheon.

“Delta has shared with us their plan and the logistics surrounding the initiation of nonstop service to Shanghai. Right now, we are studying it to make sure that it is airtight,” the ALPA told CNBC in a statement.

Simple Flying has reached out to the above-mentioned airlines with a request for further comments but was yet to receive a reply at the time of publication.

Source: https://simpleflying.com/us-airlines-pause-shanghai-flights/

Continue Reading

Aviation

HOP’s Embraer Fleet To Be Rebranded As Air France

Avatar

Published

on

Advertisement:

CEO of Air France-KLM Ben Smith has confirmed plans to fully integrate the Hop! brand into Air France. The airline will become a regional feeder for Air France, rebranded in line with the main airline. Smith is targeting a shrink of around 50% for Hop!, which will see it emerge as an all-Embraer airline.

Hop! will become all-Embraer and Air France branded. Photo: Getty Images

An all-Embraer Air France brand

Air France-owned regional airline Hop! has had mixed success as a standalone operator. It’s distinct branding and separate marketing and operations led to inefficiency in the Air France Portfolio, something that the new boss at the group is keen to iron out.

Speaking at this week’s Routes Reconnected, CEO of Air France-KLM Ben Smith explained the position with Hop!. He said,

“For Hop!, we’ve shrunk it by 50%. It’s going to be at Roissy, CDG, and it’s got a sort of mini-hub at Lyon.

“Hop will become an all-Embraer fleet around those two cities or those two airports. We’re removing the brand, so it’s basically like most regional operators’ airlines; it will be Air France operated by Hop!”

While the rebrand is no big surprise, the news that it will become an all-Embraer fleet is new. Right now, the airline operates a mix of Bombardier and Embraer aircraft, with 25 CRJs and 45 ERJs. The CRJ-700s are aging, averaging 16.5 years across the fleet. However, many of the CRJ-1000s are still quite young, most under 10 years of age.

Does this mean an end to the CRJ-1000s? Photo: Getty Images

Also aging is its fleet of ERJ-145s. These 13 aircraft are all over 15 years old, with some as old as 23. Since being grounded earlier this year, none has flown for Hop!. With Smith talking about a 50% shrink, he’s got to be targeting 35 or so aircraft for Hop!. This may well mean only the E-170 and E-190 will stay; perhaps we could even see an order for the reimagined E2 jets in future as well.

Simplifying and boosting efficiency

Smith talked at length about his plans for the main Air France brand, as well as for Transavia and Hop! during the interview. Since his arrival at Air France-KLM in 2018, Smith has been on a mission to drive down the inefficiencies at both airlines, and to streamline every element of its operation.

Advertisement:

We’ve already seen the impact of this in a number of moves. Closing down Joon made sense to Smith, because it was really just replicating the work of Air France to no benefit of the business. The downturn in demand gave him his window of opportunity to get shot of the A380s, leaving future large-capacity widebody operations focused on the more efficient A350 and Boeing 777.

Bringing Hop! more tightly into the Air France brand makes sense from an efficiency perspective. Photo: Getty Images

Bringing Hop! into the Air France family more closely is simply an extension of everything else he’s been doing. It’s not driven by the pandemic, but has certainly become more urgent. He talked about the inefficiencies of running Hop as a separate entity, saying,

Advertisement:

“Hop! was actually marketed separately. It had its own revenue management system, it had its own scheduling depot, and then it would codeshare with Air France. So it’s really going to be a regional feeder carrier.”

In the US, having regional feeders for big airlines at their hubs is normal. Look at American Eagle or Delta Connect, operated by other airlines but with a greater alignment of operations and branding. For Air France, it’s about time – KLM has had Cityhopper for many years, and now both Air France and Hop! will benefit from a similar degree of integration.

Source: https://simpleflying.com/hop-rebranded-as-air-france/

Continue Reading
Big Data3 hours ago

Teen banking app Step reaches for the stars to raise $50 million

Big Data3 hours ago

Intel’s Habana starts to chip away at Nvidia in cloud with AWS deal

Big Data3 hours ago

U.S judge hearing Google case rejects government’s protective order request

Big Data3 hours ago

Uber, JetBlue join Amazon-backed Climate Pledge

Big Data4 hours ago

Simple & Intuitive Ensemble Learning in R

Aerospace5 hours ago

50,000th PT6 engine rolls off Pratt & Whitney’s production line

Aerospace5 hours ago

Helicopter sale strengthens GKN Aerospace’s defence portfolio

Aerospace6 hours ago

Construction starts on AMRC North West in Lancashire

Aerospace6 hours ago

Automatic evaluation of X-ray detector performance

Aerospace6 hours ago

Otto Aviation selects VOLTA as its collaborative MDO framework

Aerospace7 hours ago

Harnessing innovation crucial to UK aerospace and defence future

Crowdfunding8 hours ago

Payment Service Provider PingPong Payments Secures E-Money License in Luxembourg

Big Data8 hours ago

NoSQL for Beginners

AR/VR9 hours ago

Solaris Offworld Combat’s Squad Update Allows Friends to Teamup

Big Data9 hours ago

RPA‌ ‌in‌ ‌Banking‌ ‌and‌ ‌Finance‌ ‌Industry:‌ ‌The‌ ‌Use‌ ‌Cases‌ ‌and‌ ‌Benefits‌ ‌

Start Ups9 hours ago

Messaging Software Startup Aampe Raises Rs 13 Crore From Sequoia India Surge

Start Ups9 hours ago

Tata inches closer to make foray into Online Grocery Biz

Big Data9 hours ago

Droning the drove: Israeli cow-herders turn to flying tech

Big Data9 hours ago

UK watchdog studies ‘range anxiety’ in electric vehicle charging

Big Data9 hours ago

Salesforce to buy workplace app Slack in $27.7 billion deal

Aerospace10 hours ago

Valuechain’s MES solution now integrates PrintSyst’s AI Engine

Big Data10 hours ago

Do China tech giants pose a risk for European banks?

Aerospace10 hours ago

Paragraf drives electric transport revolution with graphene sensors

Start Ups10 hours ago

Genesis Therapeutics raises $52M A round for its AI-focused drug discovery mission

Blockchain News11 hours ago

Active Bitcoin Addresses Hit Third-Highest Level in November

Aviation11 hours ago

Major US Airlines Pause Nonstop Flights To Shanghai

AI11 hours ago

Facial recognition tech: risks, regulations and future startup opportunities in the EU

Aviation12 hours ago

HOP’s Embraer Fleet To Be Rebranded As Air France

AI12 hours ago

KDnuggets™ News 20:n45, Dec 2: TabPy: Combining Python and Tableau; Learn Deep Learning with this Free Course from Yann LeCun

Aviation12 hours ago

UK approves Australia-purchased vaccine

Trending