Connect with us

Cyber Security

Obama and Romney Finally Agreed on Something

Published

on

Reading Time: 2 minutes

November 6th is upon us, which in the United States means it is Election Day. And it isn’t just any Election Day but for the position of President of the United States. For months on end the 2012 Presidential Campaign has had few topics in which the two candidates actually agree on. In what has been one of the most heated campaigns in recent memory, between incumbent President Barack Obama and Republican candidate, Massachusetts Governor Mitt Romney, these two have essentially argued over everything from pulling the troops out of Afghanistan, Healthcare, and the budgets with what seems to be no intentions of any bipartisan compromise.

When pressed about the removal of the troops from Afghanistan President Obama gave a very specific exit strategy that starts with the withdrawal of troops at the end of 2012 to the passing of the security controls over to the Afghan forces by 2014. Romney has stated that he felt this was a move meant to accommodate the current economic climate in the United States and that he would not have based his decisions on the economy but rather the politics of the withdrawal.

Healthcare has been another huge issue between the two candidates. President Obama has been working on his Patient Protection and Affordable Care Act (also known to the public as ObamaCare) or “ACA”; which has drawn a lot of criticism from the Republican Party. While the ACA was passed by congress in March of 2010 and the Supreme Court recently approved its constitutionality, it is still being criticized outwardly. Romney has stated he also has a plan (known to the general public as RomneyCare) which was put into place in his home state of Massachusetts and would build upon those attributes on a larger scale if he is elected.

The federal budget has been at the top of the list to anyone following the campaign. Obama wants to allow the Bush era tax cuts to expire and would continue to reduce the deficit by about $4 trillion over the course of 10 years (this includes 2012). President Obama has issued a 53 paged report detailing his entire plan. Romney on the other hand wants to make all the Bush era tax cuts permanent while making some specific cuts, which he made public during his campaign and the debates. These cuts would include: Repealing the Affordable Care Act, cutting funds to PBS and to reduce the federal workforce by 10%, just to name a few.

Could these two have agreed on anything over the last 18 months?

Now, after all of that, is it possible that they could have agreed on anything? The answer is surprisingly, yes! Both of their websites, BarackObama.com and MittRomney.com, both require protection. They have responded to this necessity by protecting their sites with one of the best Internet Security companies on line today: Comodo.

Comodo has been, as their motto states, “Creating Trust Online” for almost fifteen years and has the distinction of working hand in hand with many top companies around the world in protecting not only their websites but also utilizing their Internet Security software to defend against viruses and malware. Comodo has a wide variety of products that include SSL Certificates, Internet Security, Browsers, Cloud and Site Backup services, just to name a few of their products.

It is good to see that these two political heavyweights, regardless of their views and opinions on countless topics, can at least agree on one very important thing.

TEST YOUR EMAIL SECURITY GET YOUR INSTANT SECURITY SCORECARD FOR FREE Source: https://blog.comodo.com/e-commerce/obama-and-romney-finally-agreed-on-something/

Cyber Security

How To Download Vimeo Private Videos?

Published

on

Table of Contents

6 Steps to Download Vimeo Videos That Aren’t Public

Are you looking for a way to download personal Vimeo videos?

Downloading personal Vimeo videos can be difficult because there isn’t a download option.

On the other hand, if you want to download a public video from Vimeo, you can do so by clicking the “Download” button.

If you want to buy a movie set for yourself, you’ll need to take a few more steps.

This guide will walk you through six simple steps to upload a.MP4 file to your personal Vimeo account.

You can follow the exact steps outlined at the end of the handbook to download personal videos from Vimeo at a later time.

How To Download Vimeo Private Videos?

Examine the page, play with the movie, go to the community, type “participant,” refresh the page, and then click on the file.
Finally, save the file as a.txt file, duplicate the.mp4 connection, and tap on the video to save it.

Here’s a step-by-step guide to help you get started.

  1. Examine the page and watch the video.
  2. Go to network and type “player” in the search box.
  3. Reload the page and select the first file from the drop-down menu.
  4. Save the file as a text file (.txt).
  5. Copy the.mp4 link to your clipboard.
  6. Save the video by right-clicking on it.

SEE ALSO:

How Do Isps Track Torrenting? | When you torrent, what does your ISP see?

Step 1: Look over the page and watch the video.

  1. Go to your own Vimeo video > right-click anywhere on the page > select “Inspect”> perform for a few seconds with the movie (this can load up extra HTML and CSS files that are needed later on).
  2. To begin, open a Chrome browser and navigate to your personal Vimeo video.
  3. After that, right-click anywhere on the page.
  4. There are various options available, including “Back,” “Reload,” and “Inspect.”
  5. You’ll want to use “Inspect” as an alternative.
  6. This feature allows you to examine a webpage’s HTML and CSS, which you will need in the future.
  7. Play with the movie for a few seconds once you’ve selected “Inspect.”

This may result in the loading of more HTML and CSS resources, which will be required later.

Step 2: Go to network and search for “player.”

Choose “Network” from the Inspect section’s upper navigation bar, then search for “Player.”
Second, you’ll notice a number of tabs on the upper navigation bar of this Inspect section–Components, Console, Resources, Network, and so on.

  1. Select the “Network” tab (the one tab in the left of the best navigation bar).
  2. Kindly type “participant” into the search field as soon as you arrive.
  3. There are a lot of HTML and CSS documents here. As a result, this will be used to filter the document you wish to use.
  4. Multiple participant HTML and CSS documents will show as soon as you input “participant.”

SEE ALSO:

Cybersecurity Degrees in New Hampshire

Step 3: Reload the website and select the first file.

Important: You must refresh the webpage after searching for “participant” in the Network tab (this may load up the necessary HTML documents ).
This step is required for the job to be completed.

  1. After you’ve completed the previous step’s search for “participant,” you’ll want to refresh the page.
  2. The HTML document that you’ll need to use later will not load.
  3. Added HTML files will appear after you have refreshed your webpage.
  4. Because of their names, these records have numbers (e.g., 393999309, 394000471, 394000590).
  5. To see the first record that appears, click it.

Step 4: Save the file as a text file (.txt)

  1. Place.txt in the document title’s back to save the document as a.txt file (e.g., 393999309.txt).
  2. You’ll want to save the first document after you’ve clicked it.
  3. Right-click on the HTML code on the document’s ideal side and select “Save as…”
  4. After that, you’ll need to save the document as a.txt file.
  5. To accomplish this, add.txt to the end of the document title (e.g., 393999309.txt), and the document will be converted to a.txt file.
  6. When you’ve finished storing it. You’ll be able to see the HTML code for a Txt file.

In Notepad, press CTRL + F to get the video’s quality (e.g., 720p) and then copy the.MP4 URL.

SEE ALSO:

Vpn Turned Off While Torrenting | What happens if VPN disconnects?

(Check the video’s quality before downloading it)

  1. Open the—Txt file in your folder that you just saved.
  2. As soon as you open it, you will notice a large piece of text, which is the HTML code for this article.
  3. The quality of the film is the specific text you should be looking for (e.g., 480p, 720p, 1080p).
  4. Let’s imagine you want to save the video at 720p resolution.
  5. There are several tabs on the upper navigation bar of this Notepad: File, Edit, Format, View, and Help.
  6. After that, select “Edit” and then “Locate.”
  7. Alternatively, you can use the CTRL + F keyboard shortcut.
  8. Fill in the video’s quality and where you’d want to save it (e.g., 720p).
  9. Find the text that includes the movie’s quality (e.g., 720p) and the.MP4 URL.

An example of a URL to look for:

“https://vod-progressive.akamaized.net/exp=1604825182~acl=%2Fvimeo-prod-skyfire-std-us%2F01%2F1156%2F17%2F430781346%2F1872225377.mp4”

Make a note of the.MP4 URL, copy it, and proceed on to the next step.

Step #6: Save the video by right-clicking on it.

  1. Glue the.MP4 link you copied in the last step to the movie, then save it as an.MP4 file.
  2. Finally, paste the.MP4 URL you copied into your browser.
  3. After you’ve completed this, the movie will play in the quality you specified.
  4. Right-click the movie and select “Save as…” to save it as an MP4 file.
  5. You’ve successfully saved your own Vimeo video as an.MP4 file!

PlatoAi. Web3 Reimagined. Data Intelligence Amplified.
Click here to access.

Source: https://cybersguards.com/how-to-download-vimeo-private-videos/

Continue Reading

Cyber Security

Soundcloud Pro Unlimited Worth It?

Published

on

The advantages of Soundcloud Pro Unlimited are well worth it.

Table of Contents

What is SoundCloud?

SoundCloud is the largest open audio platform in the world. It has over 190 million music from 20 million creators that users in 190 countries have listened to.

Users can record and upload sounds to share with the public or choose others on the network confidentially. In the comments section of your post, you’ll evaluate your track’s performance and communicate with listeners.

If you want to discover new voices, you’ll follow artists to keep track of their uploads on your feed. You’ll also be able to bookmark your favourite music and playlists to listen to later.

Is Soundcloud pro with unlimited storage worth it?

SoundCloud Pro Unlimited is a premium version of the site that costs $12 per month if paid annually and $16 per month if paid monthly. Creators have unlimited audio upload time and storage with this capability. They will arrange the release of their music and collect more detailed statistics, such as the location of their top listeners, so that the gadgets will want to play their sounds. Creators also have more personalization options, such as whether or not they want to appear in comments and which five tracks, playlists, or albums they want to highlight at the top of their profiles.

SEE ALSO:

Cybersecurity Degrees in South Dakota

Analytics

You’ll be able to use a wide range of metrics once your Soundcloud Pro Unlimited is worth it. Pro users will have access to considerably more information than just the fundamental numbers. This means you’ll be able to observe which users and pages are most interested in your music, as well as which influencers, labels, and artists are paying attention to it. Furthermore, you’ll be aware of your listeners’ circumstances, making it easier to organize your next tour, for example. You’ll also be able to see how many times a music has been played on each app and website, giving you even more insight into the success of each of your releases.

Controlling the content

SoundCloud gives Pro users the option of turning on or off public analytics and comments to allow them more creative flexibility. You can also pin one or more tracks to the top of your profile, increasing the number of clicks and downloads to your most recent release. In this approach, your visitors will be able to express their gratitude to you more quickly.

Verification of Profiles

Your profile is given a verification mark when you become a professional user, making your face appear more credible. While the verification sign just indicates that you are a paying member, it prompts listeners to view your persona and profile, resulting in additional clicks, streams, and downloads.

SEE ALSO:

How to Become a Security Consultant

Restrictions on Download

You’ll be limited to 100 downloads per track if you’re a free SoundCloud user. This restriction is increased to 1000 by upgrading to SoundCloud Pro, while SoundCloud Pro Unlimited customers have unlimited downloads. This method is beneficial since the more downloads a music receives, the greater the benefit to your brand and, as a result, the more visibility you’ll receive.

Soundcloud pro unlimited worth it

Because of the enormous influence of SoundCloud’s services, it’s critical to devote time and effort to your SoundCloud profile. The most crucial thing is that you have a complete Soundcloud profile with relevant content. It’s up to you from there. If you’re not interested in analytics, don’t mind the verification button, and don’t want to share downloaded tunes, the free profile is for you. If you want to get the most out of Soundcloud, a subscription plan will provide you access to some useful extra features that will help you build your account faster.

Soundcloud: How to Use It?

You can either produce your own sounds or listen to other people’s audio on SoundCloud. You may either create a free account or sign up for one of the subscription plans. Once you’ve created an account, go to the upload tab in the upper right corner of your page to upload your first recording. You’ll give the audio a title, a description, and a genre, as well as choose whether it should be public or private.

SEE ALSO:

Cyber Security Jobs – Guide to Cybersecurity Jobs

To hear what other people are saying, go to the top screen and search for a specific name or phrase, or browse the categories on your home page, such as Top Playlists and New Arrivals. Once you begin to enjoy certain songs and albums, your music library will be replenished. You’ll also follow creators so that you can see their latest uploads in your feed.

What is SoundCloud’s role in the music industry?

SoundCloud Pro Unlimited caters to musicians, whilst SoundCloud Go caters to listeners. Artists may plan their releases, modify their sites, and obtain information into how listeners interact with their sounds using Pro Unlimited.

Another useful tool for artists is SoundCloud Pulse. It’s a SoundCloud companion app that lets you respond to comments on your tracks from your phone, get real-time information on how well your posts are performing, effortlessly share your sounds, follow other users, and update track details even after they’ve been posted.

Is there any advertising on SoundCloud?

Ads are included in both SoundCloud Basic and SoundCloud Pro. Checking in for SoundCloud Go or Go+ is the only way to listen to music without ads.

Is there a listening restriction on SoundCloud?

There is no listening limit on SoundCloud. Users of SoundCloud Basic and Go get access to approximately 120 million tracks, with additional 30 million previews available. Users of SoundCloud Go+ can listen to any of the platform’s 150 million+ channels without having to wait for previews.

PlatoAi. Web3 Reimagined. Data Intelligence Amplified.
Click here to access.

Source: https://cybersguards.com/soundcloud-pro-unlimited-worth-it/

Continue Reading

Cyber Security

How to Check If Linkedin Insight Tag is Working?

Published

on

How to Check If Linkedin Insight Tag Is Working is demonstrated here.

The LinkedIn Insight label is often known by its aliases, such as the Linkedin monitoring pixel or the LinkedIn conversion pixel.

LinkedIn is more than just a place to show off your confectionery expert headshot (nice scissors, by the way!). And try to land a project with all the best munchies in a start-up.

Furthermore, with the help of the LinkedIn Insight label, it is a place where 675 million people log in every month, implying that you have a ready-to-target audience.

The Linkedin monitoring pixel or even the LinkedIn conversion pixel are aliases for the Insight label. Is it possible to refer to a LinkedIn label as candy, um, monitor? It most certainly will, as long as you’ve included it in a site’s code.

Continue reading to learn about the benefits of the LinkedIn Insight label, how to set up the code, and how to use it to create retargeting lists for your ads.

Table of Contents

What is the LinkedIn pixel, and how does it work?

The LinkedIn pixel is a small piece of Javascript code that you place on each of your websites.

Some traffic may be left with a cookie from the browser. This way, if a visitor to your site has a LinkedIn account, you can target them on LinkedIn afterwards.

You could even use the Pixel to track conversions as potential customers click through LinkedIn ads to your website. What can’t this problem solve?! (Sadly, it turns out that I need genuine cookies.)

The Facebook pixel performs the same thing, but to a Facebook audience. (You presumably already knew that.) I can tell you’re intelligent.) Please see our Facebook Pixel installation guide for more information. See How to Check If Linkedin Insight Tag Is Working for more information.

What is the LinkedIn pixel and why do you need it?

Information is like electricity… However, if you don’t have a monitoring system in place, you won’t be able to collect data.

SEE ALSO:

Defining Residential Proxies

Including a LinkedIn Insight label on your website’s pages (including subdomains and site divisions!) It will allow you to keep track of who has visited your website.

The LinkedIn Pixel tracks events and conversions, allowing you to see what’s working and what’s not, as well as gather important insight into your ad campaigns.

You’ll be able to track website interactions as soon as they happen, allowing you to retarget lost sales and prospects. You’ll also get far higher-quality optimization and superior analytics.

After that, you can utilize that information to retarget those folks using LinkedIn advertising specifically.

You are the Wizard of Oz, but also for the world’s largest business networking website. All-knowing, all-powerful–you are essentially the Wizard of Oz, but also for the world’s largest business networking website.

How to add a LinkedIn pixel to your website and how to make it work

You’ll need to include that Javascript code to your Site’s code in order to use the LinkedIn Pixel. Wear fingerless gloves and a pocket chain to look like you’re from the movie Hackers. It only adds to the hilarity. see Trust me, I know how to check if Linkedin Insight Tag is working.

  • Log in to the LinkedIn Campaign Manager and think about it.
  • Select Insight Label from the dropdown option under Account Assets.
  • Install My Insight Tag by clicking the blue Install My Insight Tag icon.
  • Select View Tag from the dropdown menu after clicking on the Manage Insight Tag.
  • To view the Insight Tag code, choose the “I will install the label myself” checked.
  • Copy the Insight Tag code and paste it into the clipboard.
  • Paste this Insight Tag code before the label’s conclusion in the global footer on each page of your website, including subdomains, on the back of your site.

After that, we’ll check to see if your LinkedIn Pixel is working.

  • Navigate to Account Assets on your LinkedIn Campaign Manager.
  • In the dropdown menu, choose Insight Tag.
  • Under Tagged Domains, you must grasp your site’s name.
  • Your domain will be proclaimed “Active” after a LinkedIn member has seen it.

SEE ALSO:

What Is Cyber Security?

Keep in mind that it could take up to 24 hours for it to show. If this happens after you’ve practised for a while, you might want to look into the LinkedIn service for help.

How to construct website retargeting lists with the LinkedIn pixel

So you’ve gotten your hands on a LinkedIn Pixel in your lifetime… So, what’s next?

It’s a fantastic tool that can tell you if your website has been seen by LinkedIn members. Not only that, but you may target demographics inside the LinkedIn membership for a more targeted advertising and marketing and advertising effort.

  • Go to the Campaign Manager page.
  • Select Matched Audiences from the dropdown option under Account Assets.
  • Choose site Audience from the selection menu when you click the blue Generate Exceptions button at the top of the page.
  • Give your readers a title and the URL of the site you’d want to retarget (a.k.a: the domain name in which you put your LinkedIn Tag.)
  • Then press the Generate button.

You’ll be able to arrange attempts to distribute adverts directly to a certain targeted audience after your sections have 300 associates.

The amount of time it takes will be determined by the number of visitors to your website. Visit the official LinkedIn Tracking page for a detailed analysis.

When things become hectic, you’ll be able to use filters to tailor your customers’ subsets and target individuals who have visited specific pages on your site. Choose from “Pages That Begin with This URL,” “Pages That Have This Specific URL,” or “Pages That Have URLs That Include The Specified Text.”

Check out Hootsuite’s guide on enhancing your LinkedIn page if you want to start using LinkedIn Ads after you’ve created your retargeting list. (Keep in mind that you’ll only be able to retarget users who have visited your website in the last 180 days.)

How to use LinkedInPixel to measure conversions on LinkedIn

Another thing you can do with this useful little Pixel (basically your new BFF) is track conversions from LinkedIn advertising.

  • Return to the Campaign Manager’s simple interface.
  • Select Conversions from the dropdown menu under Account Assets.
  • Simply click the Generate a Conversion button (top right).
  • Give your conversion a name (this may be visible to you).
  • Now, fill in the blanks with your preferences:
    • Conversion type: This specifies the behaviours you’ll monitor. Perhaps you’d like to know how many men and women are watching your music video, downloading a PDF, or filling out a direct form.
    • Conversion value: This field is optional; however, if the actions have a monetary value, it may be useful to include it here to track the ROI of your advertising investment in complex numbers.
  • Window for navigation
  • If it’s a day, a week, a month, or even three weeks, this is when your conversions will be measured.
  • Version of attribution: This is where you designate how each advertisement discussion will be held accountable for a conversion.
  • Then select which campaigns will be tracked for conversions using the checkboxes.
  • If you don’t select any, your conversions will be associated with all campaigns in your account.
  • Choose your chosen conversion process–the Insight Tag–and then enter the URL of the website where you’ll be tracking conversions.
    • Suggestion: After a guest has done the requested steps, this may be a Thank You or Verification page (by Way, of instance, signing up for the newsletter).
    • Optional: Use Boolean principles to be more specific about which URLs count as ranks – it may be “Consume this specific URL,” “Start for this URL,” or other criteria.
  • Create a new document!

SEE ALSO:

Cybersecurity Resource Center

Return to the Campaign Manager once your campaign has been running for a while to check out the numbers and see how effective your complete marketing plan has been. You can also get entire or specific campaign effort reports for the accounts.

I am confident that you will outperform the results of my spoof illustration commercial. Thank you very much:

So there you have it: the inside scoop on the LinkedIn Pixel’s comprehensive monitoring capability.

However, there is always something new to learn about the platform’s ever-changing world.

Please see our guide to LinkedIn ads for more information, or read on for some expert advice on how to make your LinkedIn Business webpage the best it can be.

PlatoAi. Web3 Reimagined. Data Intelligence Amplified.
Click here to access.

Source: https://cybersguards.com/how-to-check-if-linkedin-insight-tag-is-working/

Continue Reading

Cyber Security

Microsoft WPBT Flaw Allows Hackers Install Rootkits on Windows

Published

on

Researchers discovered a hole in the Microsoft Windows Platform Binary Table (WPBT) that could be used to install rootkits on all Windows devices manufactured after 2012.

Rootkits are malicious tools created by threat actors to elude discovery by burrowing deep inside the operating system and being utilised to completely take over vulnerable systems while avoiding detection.

Starting with Windows 8, Microsoft introduced WPBT, a fixed firmware ACPI (Advanced Configuration and Power Interface) table that allows suppliers to run programmes every time a device starts.

However, this approach can allow attackers to deploy malicious programmes, as Microsoft cautions in its own literature, in addition to allowing OEMs to force install important software that can’t be supplied with Windows installation media.

“Because this feature provides the ability to persistently execute system software in the context of Windows, it becomes critical that WPBT-based solutions are as secure as possible and do not expose Windows users to exploitable conditions,” Microsoft explains.

“In particular, WPBT solutions must not include malware (i.e., malicious software or unwanted software installed without adequate user consent).”

All machines running Windows 8 or later are affected.

Eclypsium researchers discovered a flaw in Windows machines that has existed since 2012, when the feature was initially introduced with Windows 8.

SEE ALSO:

Adobe Warning for a Security Vulnerabilities Affecting its Popular Photoshop

These attacks can make use of a malicious bootloader or various approaches that allow writing to memory where ACPI tables (including WPBT) are stored.

This can be accomplished by exploiting the BootHole vulnerability, which bypasses Secure Boot, or by launching DMA attacks on weak peripherals or components.

“The Eclypsium research team has identified a weakness in Microsoft’s WPBT capability that can allow an attacker to run malicious code with kernel privileges when a device boots up,” Eclypsium researchers said.

“This weakness can be potentially exploited via multiple vectors (e.g. physical access, remote, and supply chain) and by multiple techniques (e.g. malicious bootloader, DMA, etc).”

WDAC policies are one type of mitigation measure.

Following Eclypsium’s notification of the flaw, Microsoft advised adopting a Windows Defender Application Control policy to control which binaries can execute on a Windows device.

According to Microsoft’s support article, “WDAC policy is also enforced for binaries included in the WPBT and should mitigate this issue,”

WDAC policies can only be created on Windows 10 1903 and later client editions, as well as Windows 11 and Windows Server 2016 and above.

You can use AppLocker policies to control which programmes are allowed to execute on a Windows client on systems running older Windows versions.

SEE ALSO:

Colonial Pipeline Initiated a Restart of Pipeline Operations at Approximately 5 PM ET

“These motherboard-level flaws can obviate initiatives like Secured-core because of the ubiquitous usage of ACPI and WPBT,” Eclypsium researchers added.

“Security professionals need to identify, verify and fortify the firmware used in their Windows systems. Organizations will need to consider these vectors, and employ a layered approach to security to ensure that all available fixes are applied and identify any potential compromises to devices.”

In the BIOSConnect function of Dell SupportAssist, a software that comes preloaded on most Dell Windows computers, Eclypsium discovered another vector of attack that allows threat actors to take control of a targeted device’s boot process and violate OS-level security protections.

The problem “affects 129 Dell types of consumer and business laptops, desktops, and tablets, including devices protected by Secure Boot and Dell Secured-core PCs,” according to the researchers, exposing around 30 million devices to attacks.

PlatoAi. Web3 Reimagined. Data Intelligence Amplified.
Click here to access.

Source: https://cybersguards.com/microsoft-wpbt-flaw-allows-hackers-install-rootkits-on-windows/

Continue Reading
Cyber Security40 mins ago

How To Download Vimeo Private Videos?

Cyber Security1 hour ago

Soundcloud Pro Unlimited Worth It?

Cyber Security1 hour ago

How to Check If Linkedin Insight Tag is Working?

Energy1 hour ago

EcoFlow представляет двухдневную домашнюю резервную электростанцию DELTA Max

Energy1 hour ago

EcoFlow wprowadza na rynek generator zasilania awaryjnego DELTA Max pozwalający zaspokoić nawet dwudniowe zapotrzebowanie na energię w przeciętnym gospodarstwie domowym.

Energy1 hour ago

EcoFlow lancia DELTA Max, una stazione di alimentazione di riserva domestica per due giorni

Energy1 hour ago

EcoFlow lance DELTA Max, une station d’alimentation de secours pour domicile

Energy1 hour ago

Společnost EcoFlow uvádí na trh domácí záložní napájecí stanici DELTA Max, jejíž kapacita vystačí na dva dny

HRTech1 hour ago

How to motivate your team to excellence just by ‘being present’

HRTech2 hours ago

HDFC Bank to increase rural reach, hire 2,500 in 2 years

HRTech2 hours ago

600 women trained to work at Saudi Arabia’s mosques

AI2 hours ago

YES Foundation, FUEL collaborate to skill disadvantaged youth

North America
Esports2 hours ago

GODSENT win DH September over Extra Salt; qualify for EPL Conference

Esports3 hours ago

Worlds 2021 Pick’em leaderboard

Energy3 hours ago

Nelson Global Products acquiert Tru-Flex

Energy3 hours ago

Nelson Global Products übernimmt Tru-Flex

HRTech4 hours ago

How about using social-media influencers to attract talent?

Esports4 hours ago

Here’s the schedule for Worlds 2021

Aerospace4 hours ago

Live coverage: Atlas 5 rocket set for launch from Vandenberg Space Force Base

Energy5 hours ago

Kehua Received 2021 Global UPS Competitive Strategy Innovation and Leadership Award from Frost & Sullivan

Energy5 hours ago

S&P Global Platts Launches Crude Carbon Intensity Calculations And Daily Carbon Offset Premiums

Esports6 hours ago

Overwatch’s competitive voice chat reportedly bugged

Esports6 hours ago

Blizzard seemingly removes a reference to Jeff Kaplan in Overwatch 2

Esports8 hours ago

Twitch celebrity meetup Sh*tCamp 2021 begins today

Esports8 hours ago

Most important takeaways from the Overwatch 2 exhibition match

Aerospace9 hours ago

Monday launch from California begins countdown to Atlas 5 retirement

Aerospace9 hours ago

Monday launch from California begins countdown to Atlas 5 retirement

Esports9 hours ago

Hell Let Loose, Mortal Kombat X reportedly headline October’s PlayStation Plus titles

South America
Esports9 hours ago

Sharks win DH September SA, win spot at EPL S15 Conference

Esports10 hours ago

New Holowear for Alolan Ninetails launching in Pokémon UNITE on Oct. 1

Trending