Home > Press > Layer of nanoparticles could improve LED performance and lifetime
Abstract:
Adding a layer of nanoparticles to LED designs could help them produce more light for the same energy, and also increase their lifetime.
Layer of nanoparticles could improve LED performance and lifetime
London, UK | Posted on August 7th, 2020
This is according to a team from Imperial College London and the Indian Institute of Technology (IIT) Guwahati who have found a new way to boost the amount of light LEDs produce. They report their innovation in the journal Light Science & Applications.
Making light-emitting diode (LED) light sources more efficient and longer-lasting will mean they use less energy, reducing the environmental impact of their electricity use. LEDs are used in a wide range of applications, from traffic lights and backlighting for electronic displays, smartphones, large outdoor screens, and general decorative lighting, to sensing, water purification, and decontamination of infected surfaces.
The team modelled the impact of placing a two-dimensional (single layer) of nanoparticles between the LED chip, which produces the light, and the transparent casing that protects the chip. Although the casing is necessary, it can cause unwanted reflections of the light emitted from the LED chip, meaning not all the light escapes.
They found that adding a layer of finely tuned nanoparticles could reduce these reflections, allowing up to 20 percent more light to be emitted. The reflections also increase the heat inside the device, degrading the LED chip faster, so reducing the reflections could also reduce the heat and increase the lifetime of LED chips.
Co-author Dr Debabrata Sikdar from IIT Guwahati, formerly a European Commission Marie Curie-Sklodowska Fellow at Imperial, commented: “While improvements to the casing have been suggested previously, most make the LED bulkier or more difficult to manufacture, diminishing the economic effect of the improvement.
“We think that our innovation, based on fundamental theory and the detailed, balanced optimization analysis we performed, could be introduced into existing manufacturing processes with little disruption or added bulk.”
Co-author Professor Sir John Pendry, from the Department of Physics at Imperial, said: “The simplicity of the proposed scheme and the clear physics underpinning it should make it robust and, hopefully, easily adaptable to the existing LED manufacturing process.
“It is obvious that with larger light extraction efficiency, LEDs will provide greater energy savings as well as longer lifetime of the devices. This will definitely have a global impact on the versatile LED-based applications and their multi-billion-dollar market worldwide.”
Co-author Professor Alexei Kornyshev, from the Department of Chemistry at Imperial, commented: “The predicted effect is a result of development of a systematic theory of various photonic effects related to nanoparticle arrays at interfaces, applied and experimentally tested in the context of earlier reported switchable mirror-windows, tuneable-colour mirrors, and optical filters.”
The next stage for the research will be manufacturing a prototype LED device with a nanoparticle layer, testing the best configurations predicted by the theory – including the size, shape, material and spacing of the nanoparticles, and how far the layer should be from the LED chip.
The authors believe that the principles used can work along with other existing schemes implemented for enhancing light extraction efficiency of LEDs. The same scheme could also apply to other optical devices where the transmission of light across interfaces is crucial, such as in solar cells.
####
For more information, please click here
Contacts:
Hayley Dunning
020-759-42412
@imperialspark
Copyright © Imperial College London
If you have a comment, please Contact us.
Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
Related News Press |
News and information
Kavli Lectures: The art of building small and innovating for industrial impact August 7th, 2020
High-sensitivity atomic force microscopy opens up for photosensitive materials August 7th, 2020
Display technology/LEDs/SS Lighting/OLEDs
Scientists discover new class of semiconducting entropy-stabilized materials July 31st, 2020
Printed perovskite LEDs: An innovative technique towards a new standard process of electronics manufacturing June 12th, 2020
Pushing Photons: Metasurface design methods can make LED light act more like lasers June 3rd, 2020
Possible Futures
Highly sensitive dopamine detector uses 2D materials August 7th, 2020
Kavli Lectures: The art of building small and innovating for industrial impact August 7th, 2020
High-sensitivity atomic force microscopy opens up for photosensitive materials August 7th, 2020
Discoveries
Highly sensitive dopamine detector uses 2D materials August 7th, 2020
Kavli Lectures: The art of building small and innovating for industrial impact August 7th, 2020
High-sensitivity atomic force microscopy opens up for photosensitive materials August 7th, 2020
Announcements
Kavli Lectures: The art of building small and innovating for industrial impact August 7th, 2020
High-sensitivity atomic force microscopy opens up for photosensitive materials August 7th, 2020
Interviews/Book Reviews/Essays/Reports/Podcasts/Journals/White papers/Posters
Highly sensitive dopamine detector uses 2D materials August 7th, 2020
High-sensitivity atomic force microscopy opens up for photosensitive materials August 7th, 2020
Water
Study: Mapping crystal shapes could fast-track 2D materials: Experts call for global effort to clear hurdles to mass production July 27th, 2020
Purifying water with the help of wood, bacteria and the sun July 10th, 2020
Two is better than one: Scientists fit two co-catalysts on one nanosheet for better water purification April 16th, 2020
Electric jolt to carbon makes better water purifier March 24th, 2020
Photonics/Optics/Lasers
Scientists discover new class of semiconducting entropy-stabilized materials July 31st, 2020
Photochromic bismuth complexes show great promise for optical memory elements July 24th, 2020
Solar/Photovoltaic
Crystal structure discovered almost 200 years ago could hold key to solar cell revolution July 3rd, 2020
Printed perovskite LEDs: An innovative technique towards a new standard process of electronics manufacturing June 12th, 2020