Zephyrnet Logo

Comodo One. Takeover remote endpoints using ITSM

Date:

Remote EndpointsReading Time: 6 minutes

Takeover remote endpoints using ITSM

ITSM’s ‘Takeover’ feature allows administrators to remotely access and control Windows devices to solve issues, install third party software and perform system maintenance.

To take over a device:

  • Open ITSM then click ‘Devices’ > ‘Device List’ and select your target Windows device.
  • Click the ‘Takeover button’ and select ‘With Comodo Client Viewer’.

Comodo Client Viewer

This will open the takeover options menu:

Download Comodo Client Viewer

  • Step 1:  If this is the first time you have used the feature then you will need to install the client viewer application. Click ‘Download Comodo Client Viewer’. The client only needs to be installed once on your admin computer.
  • Step 2:  If you have already installed the viewer then click the link in step 2 to take over the device.

ITSM will ask for permission to launch the agent on your computer. Click ‘Open Link’ to begin the connection process. Note – you can enable ‘Remember my choice for ccv links’ so you don’t have to see this dialog again:

Launch Application

Once connected, the client viewer interface will display the desktop of the remote computer:

Comodo Client Viewer Settings

Administrators can now interact with the target device to perform tasks as required.

The client interface contains the following settings and tools:

Send Ctrl + Alt + Del – Will send the Ctrl+Alt+Del keyboard combination to the remote machine to open the Windows security screen. This allows you to lock the computer, log off the current user, change passwords, view the task manager or shut down/restart/hibernate the machine.

Send Ctrl + Esc –Will open the Windows ‘Start’ menu, allowing you to launch subsequent tasks.

Full Screen, Fit to Width, Fit to Height, Fit to Origin– Change the preferred display of the remote desktop.

Options – Allows you to configure connection and display quality. Lower quality settings may be preferable if your connection is slow.

Connection Options

Frequently Asked Questions:

Do I need the (old) RMM Plug-in agent to take over a device?

No. You need only install the client viewer on your management machine (as shown above), and the ‘Comodo Client – Communication’ agent on target endpoints. The RMM plugin is approaching end-of-life, but you can still use it should you prefer.

Do I need any additional agents on my devices?

No, you only need to install ‘Comodo Client – Communication’ on endpoints.

Do I need to install “Comodo Client Viewer” on each machine that I manage?

No, “Comodo Client Viewer” need only be installed once on your admin machine. Afterward, you can use the takeover feature to remote desktop into any managed endpoint that has ‘Comodo Client – Communication’ agent installed.

How to prevent users from establishing the remote session to managed endpoints

Admins can now disable Remote Control function via Settings>Portal Set-Up>Extensions Management menu. This will hide the Remote Control button on the device list and device detail menus to prevent users from establishing remote session to managed endpoints

Step 1: Go to SETTINGS > Portal Set-Up > Extensions Management and Get focused on the switch of Comodo Remote Control. By default, the switch is been ON so click the switch to get turned OFF.

If turned OFF then the Comodo Remote Control would be presented as below.

If the Comodo Remote Control is turned OFF then the icon Remote Control in the Device Management page and also in the Device Details page will be disappeared automatically.

Before Remote Control OFF:

After Remote Control OFF:

How to inform endpoint about who connected during Comodo Remote Control session

Admins can configure the new “Remote Access” profile section to enable Comodo Remote Control to inform endpoint user about who were connected to his/her device and allows them to terminate the session if it is not a suitable time for remote connection.

Step 1: Go to ‘CONFIGURATION TEMPLATES’ → ‘Profiles’ and select a profile of the endpoint. After choosing the profile click ‘Add Profile Section’ on that select ‘Remote Access‘ option.

Step 2: Enable the option “Show notification to device user about who connected to his/her workstation and allow terminating the connection” then click ‘Save’ button.

Step 3: For taking the remote session, select the particular device and click ‘Takeover’ option on that choose ‘With Comodo Remote Control’ option.

Step 4: If the device is not installed with Comodo Remote Control software, choose Step1 then download and install the software on that machine.

Note: For a Remote session, the device has to be installed with the latest version of Comodo Remote Control software. Ensure whether the Comodo Remote Control software is available with the latest version as specified in step 2.

Step 5: Otherwise choose Step 2 and click the “link”. Allow Open CR Application pop menu by selecting it.

Step 6: It will open Comodo Remote Control of the machine which have been takeover along with session duration. The user can also stop the session of the end user who has been connected with comodo remote control if it is not suitable for remote connection.

How to use Comodo Remote Control for Multi-Monitors Support

Comodo Remote Control (CRC) now has multi-monitor support as well! Admins can now able to monitor dual screen at once, see only one screen like screen 1 or screen 2 and have the ability to change the selection during the remote session. With the help of this feature, now admins can utilize multiple monitor screens more efficiently by displaying multiple “remote monitors” simultaneously or switching between monitor screens as they prefer.

Note: Comodo Client Viewer (CCV) has been renamed as Comodo Remote Control (CRC)

Step 1: Go to ‘Applications’ > ‘Device Management‘ and select ‘Device List’ from the ‘DEVICES’ menu and select desired machine to be taken in remote then click ‘Takeover’ icon and select the option ‘With Comodo Remote Control’

Step 2: If the Comodo Remote Control is not installed on your machine which is used to take the remote connection then follow the Step 1 of the alert window as given in the screenshot. If your machine already has the latest version of Comodo Remote Control then you can directly follow the Step 2 of the alert window as given in the screenshot. Also, allow the alert ‘Open CRControl Application?’ if present.

Step 3: There will be the option ‘Multi-Screens’ if the Computer has more than one monitor. Click the Multi-Screens drop-down to get and know about all required options as follow:

Options:

  • 1. Switch Screen – You can get the focus on monitor sequentially
  • 2. All Monitors – All monitors in one screen will be displayed (Which is also the default selection)
  • 3. Monitor 1 – The first monitor will be displayed on the remote screen
  • 4. Monitor 2 – The second monitor will be displayed on the remote screen

Note: Number of monitor option depends on the number of monitors you have set up for your endpoint.

Related Resources

What is Device Manager?

Device Manager for Android

TEST YOUR EMAIL SECURITY GET YOUR INSTANT SECURITY SCORECARD FOR FREE Source: https://blog.comodo.com/it-management/comodo-one-takeover-remote-endpoints-using-itsm/

spot_img

Latest Intelligence

spot_img